Hoffman CSD3624, 36" X 24" Concept WallMount Type 4/12 Enclosure, Please Choose Depth
In stock
Reconfirm the price with seller
- Customer pickup,
- Courier
- In detail
Products of other enterprises
Technical characteristics
- BrandConcept
Description
CONCEPT® enclosures house and protect your sensitive electrical or electronic components from harsh, dirty environments. For use in installations where dirt, dust, oil, water or other contaminants are present. Streamlined styling, flush latches and an attractive, durable finish complement other electronic equipment.
Specifications
• 16 or 14 gauge steel
• Seams continuously welded and ground smooth
• Minimum-width body flange provides maximum door opening (210 degrees)
• Body flange trough excludes liquids and contaminants
• Panel mounting studs fit optional CONCEPT panels and other accessories
• Mounting holes in back of body for direct mounting or for optional external wall-mounting brackets
• Hidden hinges for clean, aesthetic appearance
• Doors are interchangeable and easily removed by pulling captive hinge pins
• Seamless foam-in-place gasket provides oiltight and dusttight seal against contaminants
• Quarter-turn slotted latch
• Door support ramp on doors 30-in. wide and wider (except window-door models)
• Four hinges on 60-in.-high doors
• Grounding stud on body
• Provision for thermoplastic data pocket (right door on two-door models)
• Hardware kit with panel mounting nuts, panel grounding hardware and sealing washers for wall mounting holes
• Installation instructions for enclosure and accessories are provided
CONCEPT single-door enclosures with solid door
• Door bar on hinge side for wire management and bonding
• Additional door bar on larger doors
• Three-point latch system on larger enclosures furnished with flush, slotted insert. Optional handles or inserts are available.
CONCEPT single-door enclosures with windows
• Clear polycarbonate window is flush with door surface
• Quarter-turn latch(es) with flush slotted insert
CONCEPT flush-mount enclosures
• Mounting frame extends completely around enclosure
• Quarter-turn latch(es) with slotted insert
Finish
Two standard finishes are available over phosphatized surfaces: ANSI 61 gray polyester powder paint inside and out or RAL 7035 textured light-gray polyester powder paint inside and out. Optional panels have white or conductive finish.
Industry Standards
Wall-mounting brackets required to maintain UL/CSA external mounting requirement.
CONCEPT solid single-door, door with window, and flush-mount models
UL 508A Listed; Type 4, 12; File No. E61997
NEMA/EEMAC Type 4, 12, 13
CSA, File No. 42186: Type 4, 12
VDE IP66
IEC 60529, IP66
CONCEPT two-door models
UL 508A Listed; Type 12; File No. E61997
NEMA/EEMAC Type 12
CSA, File No. 42186, Type 12
VDE IP 55
IEC 60529, IP55
Specifications
• 16 or 14 gauge steel
• Seams continuously welded and ground smooth
• Minimum-width body flange provides maximum door opening (210 degrees)
• Body flange trough excludes liquids and contaminants
• Panel mounting studs fit optional CONCEPT panels and other accessories
• Mounting holes in back of body for direct mounting or for optional external wall-mounting brackets
• Hidden hinges for clean, aesthetic appearance
• Doors are interchangeable and easily removed by pulling captive hinge pins
• Seamless foam-in-place gasket provides oiltight and dusttight seal against contaminants
• Quarter-turn slotted latch
• Door support ramp on doors 30-in. wide and wider (except window-door models)
• Four hinges on 60-in.-high doors
• Grounding stud on body
• Provision for thermoplastic data pocket (right door on two-door models)
• Hardware kit with panel mounting nuts, panel grounding hardware and sealing washers for wall mounting holes
• Installation instructions for enclosure and accessories are provided
CONCEPT single-door enclosures with solid door
• Door bar on hinge side for wire management and bonding
• Additional door bar on larger doors
• Three-point latch system on larger enclosures furnished with flush, slotted insert. Optional handles or inserts are available.
CONCEPT single-door enclosures with windows
• Clear polycarbonate window is flush with door surface
• Quarter-turn latch(es) with flush slotted insert
CONCEPT flush-mount enclosures
• Mounting frame extends completely around enclosure
• Quarter-turn latch(es) with slotted insert
Finish
Two standard finishes are available over phosphatized surfaces: ANSI 61 gray polyester powder paint inside and out or RAL 7035 textured light-gray polyester powder paint inside and out. Optional panels have white or conductive finish.
Industry Standards
Wall-mounting brackets required to maintain UL/CSA external mounting requirement.
CONCEPT solid single-door, door with window, and flush-mount models
UL 508A Listed; Type 4, 12; File No. E61997
NEMA/EEMAC Type 4, 12, 13
CSA, File No. 42186: Type 4, 12
VDE IP66
IEC 60529, IP66
CONCEPT two-door models
UL 508A Listed; Type 12; File No. E61997
NEMA/EEMAC Type 12
CSA, File No. 42186, Type 12
VDE IP 55
IEC 60529, IP55
Contact the seller
Hoffman CSD3624, 36" X 24" Concept WallMount Type 4/12 Enclosure, Please Choose Depth
We recommend to see